With the Beaver S-serie pipe bevelmachines you can bevel pipes with up to 25 mm wall thickness in one pass.These stationary bevelling machines are designed for high production volumes. However, they are also easy to use when it comes adjusting to another pipe size.
You can have the Beaver S-series with manual operated feeding and clamping, half-automated or fully automated with electrical driven feeding, clamping and pipe-stop.
If your wall thicknesses of the pipes are thicker than 25 mm, please check our SHW-series.
Usage: | pipe beveling, machining, deburring, tapering |
Machining range: | from O.D 12 - 90 mm |
from O.D 1'' - 3'' | |
Wall thickness: | up to 14 mm in one pass |
Usage: | pipe beveling, machining, deburring, tapering |
Machining range: | from O.D 20 - 170 mm |
from O.D 0.5'' - 6'' | |
Wall thickness: | up to 16 mm in one pass |
Usage: | pipe beveling, machining, deburring, tapering |
Machining range: | from O.D 33 - 220 mm |
from O.D 1'' - 8'' | |
Wall thickness: | up to 25 mm in one pass (1 inch) |
Usage: | pipe beveling, machining, deburring, tapering |
Machining range: | from O.D 60 - 425 mm |
from O.D 2'' - 16'' | |
Wall thickness: | up to 25 mm in one pass (1 inch) |
Usage: | pipe beveling, machining, deburring, tapering |
Machining range: | from O.D 210 - 615 mm |
from O.D 8'' - 24'' | |
Wall thickness: | up to 25 mm in one pass (1 inch) |
Usage: | pipe beveling, machining, deburring, tapering |
Machining range: | from O.D 210 - 775 mm |
from O.D 8'' - 30'' | |
Wall thickness: | up to 25 mm in one pass (1 inch) |
Designed as a beveling machine for the ID, OD and face our Beaver S series machines can handle a pipe range from .25" to 56" diameter.
Semi-automated, programmable roll grooving machines capable of handling .75" to 24" pipe in one unit.